Determination of the specific interaction of disubstituted aromatic compounds on hydrous zirconium oxide-loaded porous polymer resin

Summary A porous polymer resin loaded with hydrous zirconium oxide (Zr-gel) was evaluated as a stationary phase for the liquid chromatographic separation of disubstituted aromatic compounds. The prepared Zr-gel was used to separate disubstituted phenols andortho-substituted benzoic acid derivatives in reversed-phase mode. The retention time of catechol was greater than those of other disubstituted phenols; this implies that the Zr-gel has specificity for the phenolic hydroxyl group. The retention behavior ofortho-substituted benzoic acid derivatives on the Zr-gel was also evaluated in reversedphase mode using buffer. Phthalic acid was specifically retained in the vicinity of pH 6.0, which has been regarded as the equal adsorbic point. Similar behavior was also observed for salicylic acid, although the retention time of salicylic acid was less than that of phthalic acid. It seems that the specific retention behavior of hydrous zirconium oxide is a result of complexation with ligands such as hydroxyl and carboxyl groups. The results of this study have revealed that the retention mechanism of hydrous zirconium oxide is a combination of ion exchange and interaction based on complexation with ligands.     

PROGRESS IN PHASE INVERSION EMULSIFICATION FOR EPOXY RESIN WATERBORNE DISPERSIONS

In this review, our recent work in phase inversion emulsification （PIE） for polymer （especially epoxy resin） waterborne dispersions is summarized. Based on experimental results about PIE process, the physical model is proposed which can guide the synthesis of the waterborne dispersions such as polymer/nanoparticle composite dispersion. In the presence of a latent curing catalyst, PIE can give a crosslinkable epoxy resin waterborne dispersion. The dispersions can form cured transparent coatings with some unique properties such as UV shielding. They are promising in functional coatings, waterborne resin matrices for composites, and sizing for high performance fibers.     

带甲基侧基的环氧树脂增容剂对炭黑在丁苯橡胶中分散度的影响

用自制的带甲基侧基的环氧树脂(TMBP)作为界面增容剂, 从拉伸性能、键合胶含量、动态性能、扫描电镜和流变性能等方面, 研究了TMBP对炭黑在丁苯橡胶中分散度的影响, 并与市售通用双酚A型环氧树脂(E-51)和橡胶工业常用软化剂邻苯二甲酸二辛酯(DOP)进行了比较. 结果表明, 带甲基侧基的环氧树脂TMBP在提高炭黑分散性方面的效果远比E-51好， 其作用模式具有典型的增容特性.     

核／壳结构增韧剂对环氧树脂的抗冲改性

核／壳结构增韧剂对环氧树脂的抗冲改性张明耀，张会轩，杨海东，冯之榴（吉林工学院化学工程系长春１３００１２）（中国科学院长春应用化学研究所长春）关键词核／壳结构，增韧剂，环氧树脂，共混核／壳结构增韧剂是用分步乳液聚合技术制造的一种复合乳胶粒子，其核为橡...     

Modification of the cation exchange resin properties by impregnation in polyethyleneimine solutions: application to the separation of metallic ions

A commercial cation exchange resin Amberlite 200 has been modified after immersion in solutions of polyethyleneimine (PEI). The kinetic of fixation of the metallic ions have been determined. The modification of the surface of the resin deals with a change in the order of the affinities of the resins towards cations. The retention is the function of the formation and the stability of the complex. The conditions of modification (pH, PEI concentration and time of immersion) have been examined and the modification was confirmed by the determination of the exchange capacities, the distribution coefficient (P) and the selectivity factors (S). The obtained results revealed the effect of PEI on the exchange properties of the resin. The pH range selected (6-8) permitted a good adherence of PEI onto the resin surface. The quantity of the adsorbed PEI was increased by raising the initial concentration and the immersion period. The exchange capacity for copper ion passed from 2.6 mmol g⁻¹, in the case of unmodified resin, to 3.9 mmol g⁻¹ for the modified one.     

以交联聚乙烯醇为载体的离子交换剂对蛋白质的分离性能

本文对阴离子交换剂ＤＥＡ—ＰＶＴ常压液相离子交换色谱分离蛋白质的性能、分离条件进行了探讨。结果表明其对蛋白质的分离性能良好，容易洗脱。与载体交联聚乙烯醇相比，ＤＥＡ—ＰＶＴ对蛋白质的非特异性吸附明显降低。     

密胺-脲甲醛树脂合成工艺放大研究

以密胺－脲甲醛树脂合成的小试工艺条件为依据，完成了放大试验过程的工艺研究。研究结果与小试研究的工艺条件相吻合。     

PREPARATION OF MICROGEL-EPOXY RESIN TWO-PHASE POLYMERS BY IN SITU POLYMERIZATION~*

Microgel-epoxy resin two-phase polymers were prepared by in situ copolymerization of ethylenic monomers with unsaturated polyesters. The choice of monomers and the effect of monomer concentration on microgel particle size were discussed. Agglomeration of particles played a significant role in the early stage of polymerization. The microgel dispersion in epoxy resin was stable after the finish of polymerization. Upon curing the particles remained well dispersed.     

树脂法再生贮氢合金材料包覆液工艺中树脂吸附性能研究

本文研究并探讨了NK-ELN型离子交换树脂在再生贮氢合金材料包覆液过程中，温度、流速、溶液中离子浓度等条件对树脂交换容量和再生效率的影响，为树脂法再生贮氢合金材料包覆液工艺的制定，提供了一系列重要参数。     

染料配体脲醛树脂-二氧化锆复合微球的制备及对牛血清白蛋白的萃取性能

采用溶胶-凝胶法制备无孔脲醛树脂-二氧化锆复合微球,在碳酸盐缓冲溶液中,利用微球表面的酰胺键与三嗪染料-活性艳蓝X-BR分子中三嗪环上的活泼氯反应,将染料键合到微球表面,以牛血清白蛋白(BSA)为样品,考察了不同条件下,该萃取剂对BSA的萃取能力。结果表明,该萃取剂对BSA的饱和萃取量达到30.3 mg.g-1,同时萃取的蛋白易于洗脱,1.0 mol.L-1氰化钾的洗脱率达到93.5%。